Description
obd2 Emulator for MAN Euro6 is specially for Man Truck Euro6
After installing Euro6 Emulator, you can re move:
D sensors – YES
N sensor – YES (only in D don’t remove first N sensor !!!)
temp. sensor (s) – YES
pump – YES
level sensor – YES
ECU – YES
Kindly note:
It is possible to disable system by installing an emulator (programmable device) into the vehicle. You can switch it on/off anytime.
EURO6 Emulators using guide:
Emulator FOR Man Euro 6 does not need to be learned. You install emulator under the metal cover of ump on the right side behind the cab, and disconnect plug from Pump and connect emulator.
Next, you need to remove the fuses:
F894(Multisensor In tank)
F738 (+30 Signal of pump)
F1084 ( sensor Upstream)
Fuse F737 is now fuse of emulator.
Fuse F1109 is the fuse of sensor Downstream and A1191 mufler temperature sensor. This sensor needs to work correctly for DPF regeneration.
Finally, you need to remove Power from downstream sensor. There are two ways options, one is to cut pin 1 in sensor plug, the other way (better) is to remove pin 10 in X3212 plug. This plug is visible on rear of engine on the right side. This is TE plug (16 pin) with yellow key.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.