NanoRFE NanoVNA V2 Plus4 50KHz-4GHz Vector Network Analyzer 4 Inch TFT Shortwave HF VHF UHF 70-90dB With 3200mAh Battery

     

NanoVNA V2 Plus4

 

4GHz second generation NanoVNA vector network analyzer, our own design. The V2 Plus4 is the latest hardware version with 4" display, aluminum case, higher dynamic range, and 4 times the sweep speed of the original V2.

Features:

• up to90dBdynamic range @ 1GHz, up to80dBdynamic range @ 3GHz (see specifications below)

• 4 inch display

• 4x faster sweep speed (400 points/s)

• 4GHz maximum measurement frequency

• if DHL shipping is selected, includes 3200mAh 18650 battery

• Accepts standard flat-top 18650 lithium-ion battery, includes on-board protection and charging

Note: All NanoVNA V2 versions switch on and off the test signal rapidly, can not measure crystals and can not be used as a signal generator.

Package includes:

• VNA (with aluminum enclosure; fully assembled)

• 2 x 30cm SS405 phase stable cable (if selected)

• SOLT calibration kit SMA male (if selected)

• USB cable

• Touchscreen stylus

Documentation

User manual:

https://nanorfe.com/nanovna-v2-user-manual.html

Software

VNA-QT software download:

https://github.com/nanovna/NanoVNA-QT/releases

Firmware releases:

https://nanorfe.com/nanovna-versions.html

Support

Customer support: click "Contact Seller" on the right ==>

NanoVNA V2 support forum:

https://groups.io/g/NanoVNAV2

Discord:

https://discord.gg/DUH5Xk5

Specifications:

• Frequency range:50kHz - 4GHz

• System dynamic range:90dB(S21, up to 1GHz, calibrated, 20x averaging)

• System dynamic range:80dB(S21, up to 3GHz, calibrated, 5x averaging)

• System dynamic range:70dB(S21, up to 3GHz, calibrated, no averaging)

• S11 noise floor (calibrated):-50dB (up to 1.5GHz), -40dB (up to 3GHz)

• Sweep rate:400 points/s

• Display:4'', 480 x 320

• USB interface:USB Type-B

• Power:USB

• Battery: 3000mAh 18650 lithium battery (included if DHL shipping is selected)

• Maximum sweep points (on device):201

• Maximum sweep points (USB):1024

• Port 2 return loss (1.5GHz):20dB typ

• Port 2 return loss (3GHz):15dB min, 17dB typ

• VNA-QT software supported platforms:Linux, Windows (7+), Mac OS

For usage instructions see the user guide (linked above).

Battery

Accepts standard 18650 lithium-ion battery. Includes USB charging.

Operation without a battery is also supported.

You can insert a standard 18650 flat-top 3.6V lithium-ion battery like the following:

The NanoVNA V2 Plus4 includes on-board battery protection and charging circuitry and can charge the battery from USB. Seeherefor how to insert the battery.

After inserting the battery, you need to plug in USB power at least once to activate the battery management IC.

---

---