Duplex MMDVM Hotspot Board + OLED + Antenna + Case Kit Support P25 DMR YSF For Raspberry PiFeatures:-High performance 32-bit ARM processor-Supports DMR, P-25, D-Star and System Fusion-Fully tested-Onboard LED to show status (TX, RX, PTT, Mode)-SMA antenna connector, antenna included-Mounts cleanly on all current Raspberry Pi's including the Pi Zero
WIDELY COMPATIBLE: Supports DMR, P-25, D-Star and System Fusion
WORK with RASBERRY Pi: Mounts cleanly on current Raspberry Pi including the Pi Zero
Mode:Support both Duplex mode and Simplex mode
Differencs in Duplex and Simplex:in Duplex mode,have 2 time slots, and Tx and Rx can do at the same time
Radio Frequency : in duplex mode,support uhf 430-440MHZ, in simplex mode support both uhf 430-440MHz and vhf 140-150MHz
Best adjusted: TX =0, RX=0，need no offset.
Modem select: STM32-DVM/MMDVM_HS-Raspberry pi Hat(GPIO)
Aluminum shell:High RF performace
Antenna:4 antenna, 2 for UHF, 2 for VHF
LEDs:on board leds to show status, with status words on shell
How to write WiFi detail into the Hotspot:Method 1: Generate WiFi config file, and plug it into TF card.We need a TF reader. Put our TF card into this TF reader and plug this into our computer.Go to http://www.pistar.uk/wifi_builder.php and then fill your WIFI name into the SSID, password into the PSK, click submit. Then the file “wpa_supplicant.conf” is generated. Drag this file into your TF card’s boot path. And plug the card into your hotspot. Power up your hotspot, and wait for 1-2minutes.Then we go to http://pi-star and play with the settings. Please keep this in mind that gadget only support 2.4 Gigahertz router, and it does not work with 5.8G router.
Method 2: Use tmp WiFi to add new WiFi info into hotspot For convenience, we have placed a tmp WiFi config file in the TF card. Tmp WiFi SSID is m100, password is abc12345. You can make up a tmp wifi by you mobie phone,using the same SSID and the same password. Connect your computer to this tmp wifi, and go to http://pi-star, login, use the username pi-star and password raspberry. The hotspot will auto connect to this tmp wifi so.
Add network and write you home wifi ssid and psk(make sure the ssid and password is right).Then save and connect.Close the tmp mobile hotspot. Restart the MMDVM hotspot, it will auto connect to your home wifi.After about 2 minutes, you can go to http://pi-star, and check the current wifi name.If you need more helps,please go to the website https://youtube.com, and search mmdvm or duplex mmdvm.How to set hotspot to Duplex mode and work:Go to http://pi-star, username: pi-star, password: raspberry (make sure wifi config file has plug into TF card)
Recommend to register static talk group,keep long time in groupsClick Edit Repeater. Then Register.
UHF band in centimeters is 70.
Then log in.
Choose My hotspots and the dmr id. Add your talkgroups to the Timeslots. Then you can keep long time in these groups.
Package List:
1. OLED display x1 (installed on board)
2. Raspberry Pi Zero W x1
3. Duplex MMDVM hotspot board x1
4. 8G TFT card x1
5. Aluminum Shell x1
6. 433Mhz Antenna x2.
7. Usb cable x1
8.English manual x 1
