LOTO OSCH02 USB PC Virtual Digital Oscilloscope 100MHz Bandwidth 1GSa/s Sampling Rate Logic Analyzer 2 Channel

 Connector type :

2 channels with BNC sockets, 20 mm spacing.

 Vertical resolution:

8 Bit ~ 13 Bit .

 Maximum sampling rate (S/s):

250M (real time), 1G (equivalent)

 Bandwidth ( −3 dB):

100MHz

 Input coupling:

AC/DC.

 Input characteristics:

1MΩ || 25pF.

 PC OS requirements:

Windows XP, Win 7, Win 8.1, Win10 (32 bit and 64 bit).

 Over-voltage protection:

±60.0v (x1), ±600.0v (x10). (DC + AC peak)

 Triggering type:

Rising/falling edge according to trigger level, Pulse width trigger.

 Triggering mode:

None, auto, normal, single.

 Pre-trigger capture:

1%~99% of capture size.

 Automatic measurements:

Maximum, minimum, average, RMS, frequency, period, positive pulse width, negative pulse width, duty cycle, rise time, peak-to-peak value.

 Frequency response mapping

Scanning the frequency, record the process frequency and magnification data, and draw the frequency response curve.

 Measurement statistical curve:

The historical trend of the automatically measured quantities can be plotted for statistics and analysis.

 Pass / Fail detection:

You can set the upper and lower limits of the measurement quantity, and perform Pass / Fail detection and fault alarm function on the measured signal.

 Deep measurement:

With this function, the waveform jump points are automatically numbered and marked, and the time difference between the two adjacent numbers is automatically displayed.

 Samples Interpolation:

Linear or sin(x)/x.

 FFT:

1024 ~ 16K points.

 FFT window function:

Rectangle, Hanning, Hamming, Blackman.

 Math:

A+B, A-B, AxB, X-Y.

 Acquisition Modes:

Normal mode / High Resolution mode / Peak detect mode.

 Waveform recording and playback:

File format :

*.oscxxx.

Record depth:

50 ~ 450 frames.

File size:

6 MB ~ 20GB.

 Save as file:

txt, csv, excel,  oscxxx, jpg.

 Comparison reference:

Support waveform image import and real-time waveform comparison reference. It can import waveform pictures, set gray level and transparency, move up and down, and zoom in and out horizontally and longitudinally.

 Data logger Sampling Interval:

1 second to 1 hour.

 Data logger Record Duration:

1 minute ~ 72 hours.

 Temperature range:

Operating: 0 °C to 40 °C (20 °C to 30 °C for stated accuracy). Storage: −20 °C to +60 °C.

 Reference Output:

1K Hz, 1.5 V square wave output with 50% duty cycle. Software-configurable PWM output with adjustable frequency and duty cycle.

 Size:

153(L) x 93(W) x 23(H) mm.

 Languages (full support):

English, Chinese (simplified).

 Compliance:

CE, FCC.

 Net weight:

210 g.

 Input sensitivity (10 vertical divisions):

20 mV/div to 2 V/div.

 Input ranges( probe x1):

±100 mV to ±5 V full scale, in 7 ranges.

 Timebase selection (10 horizontal divisions):

5 ns/div ~ 60 s/div, in 32 ranges.

Typical noise 

(peak to peak voltage):

20 mV/div

2 mV

50 mV/div

5.8 mV

100 mV/div

8 mV

200 mV/div

22 mV

500 mV/div

38.8 mV

1 V/div

88.2 mV

 Memory depth

 (byte /Ch):

64K

≤50 ms/div

258K

200 ms/div

645K

500 ms/div

2M

1 s/div

8M

2 s/div

10M

10 s/div

20M

20 s/div

30M

30 s/div

40M

40 s/div

50M

50 s/div

60M

60 s/div

 Trigger type:

Hardware

 Trigger source:

Channel A

 Power consumption:

5 v || (248~279) mA

 Protocols decoding:

UART/RS-232/485/422, I²C,CAN,SPI

 FIR Filtering:

Band-pass, Band-stop

 Custom probes

Support two-point calibration of any current clamp on the market.

Model:

OSCH02

Detail:

Support Windows

Input channels:

2

Maximum sampling rate (S/s):

1G

Bandwidth (−3 dB):

100MHz

FFT:

Data logger:

I/O extension:

Serial bus decoding:

Hardware trigger:

Pulse width triggersupport:

Signal generator module  support:

Logic analyzer module :

Android Phone/ Tablet support

Isolated differential input  model

Optional

Custom probes

Frequency response mapping

√